Brother is known for producing great printers at low cost. High printing speed and low upkeep cost are the main USP of Brother Printer. But despite having a great stature in the printer market, Brother printer often encounter with technical and hardware glitches. If you are in the middle of severe printer breakdown, feel free to contact Brother Printer Technical Support +1-855-536-5666 today.
Are you unable to replace few consumables like Belt drive and waste toner box on your Brother printer? If so, then you don’t need to worry now. All you need to follow our instruction carefully to get the perfect replacement.
Belt Drive
- Turn off your printer.
- Unplug printer power cable from the power source.
- Hold the top cover from the middle and lift it gently.
- Now carefully hold and take out the drum unit and toner cartridge assemblies from the printer. (Note: Do not touch any electrodes or electrical circuit while doing this action)
- Hold the green holding to lift the best unit.
- Unpack the new belt unit.
- Slide the drum and toner cartridges unit back to the machine. (Note: While sliding the drum and toner cartridges unit, ensure that toner cartridges color should match the color label on the printer.)
- Close the top cover.
Now it turns to reset the belt printer counters. To do so, you must follow the underneath steps carefully.
- Plug the printer power cable back to the power source and switch on the machine.
- Press Menu 5, 6. And Press the navigation arrow to choose the belt unit.
- Press OK and then 1 button to reset the belt unit counter.
- Press Exit to finish up the process.
Waste Toner Box
- Turn off your printer.
- Unplug printer power cable from the power source.
- Hold the top cover from the middle and lift it gently.
- Now carefully hold and take out the drum unit and toner cartridge assemblies from the printer. (Note: Do not touch any electrodes or electrical circuit while doing this action)
- Hold the green holding to lift the best unit.
- Remove the orange packing material from the printer.
- Slide the new waste toner box in the machine.
- Slide the drum and toner cartridges unit back to the machine. (Note: While sliding the drum and toner cartridges unit, ensure that toner cartridges color should match the color label on the printer.)
- Close the top cover. For more help on the issues, dial Brother Printer Customer Support Number and fix the issue upfront.
Comments
Post a Comment