Brother is a leading low-cost printer’s OEM in the world. Apart from its great performance and affordability, Brother Printer also offers good service life provided users avail it’s maintenance on the regular premise. But there are some downsides too; Brother Printer is often encountered with technical issues and hardware failure. To counter that in a better way, we suggest you connect with Brother Printer technical support +1-855-536-5666 executive today.
Brother Printer typical issues
The printer is not booting up
This condition may be popped up due to an invariable power surge or fluctuating voltage. This invariable potential difference across the printer circuitry triggered the machine’s internal safety mechanisms and this is why this problem came into existence. To overcome this issue, switch off the machine and unplug the power cord. Wait for a couple of minutes and then plug the power cord back to the power source. Hope this can fix the issue.
A printer is not detected by the PC
If you are windows users and facing this issue then you need to change the firewall setting to allow your PC to detect the printer.
Wrinkle on the printouts
- Use the standard type of paper.
- Ensure that the back cover is closed.
- Ensure that the two grey levers inside the back cover are in the up position.
- Make sure that the printer setting should match the paper that you are using for printing.
Uneven density across the printouts
To overcome this issue, make sure to avail a printer calibration process in the following way
- Press Menu, 3, 5.
- Press up arrow or down arrow to select Calibrate.
- Press OK and then 1 to select Yes.
- Press Exit.
Once you finish this process, you need to reset the calibration parameters in the following way
- Hit Menu 3, 5
- Press up arrow or down arrow to reset.
- Press OK and then 1 to select Yes.
- Press Exit.
All these methods mentioned above are quite capable to deal their respective issue. If you have any issues regarding that, make sure to connect with Brother Printer Customer Support and fix the issues upfront.
Comments
Post a Comment